Trusted Blown-In Insulation for Las Vegas Homeowners
Blown-in insulation in Las Vegas fails for a reason most homeowners never see: the attic floor was insulated before it was sealed, so the desert heat pushes conditioned air straight out through gaps around can lights, top plates, and wire penetrations. We fix the order of operations. Every job starts with air sealing, then the insulation goes in, and we publish before-and-after blower-door numbers – a pressurization reading that shows, in one figure, how much air your envelope was losing – so you can see what changed. Our technicians have up to 10 years of experience, we’ve sealed and insulated more than 9,000 homes since 2016, and on applicable jobs you get the readings in writing. Same-day scheduling is often available in Las Vegas; call (833) 362-4859 and a live person answers, day or night.
Key Takeaways
- We air seal the attic floor first, then blow insulation – never the other way around.
- Most Las Vegas blown-in jobs run $1,400 to $4,200 depending on square footage, R-value target, and how much old material has to come out.
- You get a written price before any work starts and a Documented Photo Record when we leave.
- Before-and-after blower-door readings are provided on applicable jobs.
- Calls are answered by a live person 24/7, and estimates are free.
What Our Blown-In Insulation Service Includes

Blown-in insulation is loose fiber – cellulose or fiberglass – machine-pumped into attic bays or wall cavities to a measured depth that hits a target R-value. In Las Vegas, that R-value target matters more than in most markets because attic temperatures routinely pass 140°F in July, and the wrong depth or a compressed batt leaves the ceiling plane fighting heat it can’t stop. Here’s how each piece of the service works.
Blown-In Cellulose
Cellulose is ground recycled paper treated with fire retardant, and it settles into odd shapes better than batts do – around ductwork, over truss chords, into the corners of a hip roof where fiberglass leaves gaps. You need it when your attic has bare spots, thin coverage, or pest-compacted material that no longer holds loft. We source cellulose through GreenFiber and blow it to a measured depth with depth markers stapled to the joists so you can verify the R-value yourself after we leave. Cellulose also damps sound, which matters in Las Vegas homes near the 215 and the airport corridor.
Blown-In Fiberglass
Fiberglass loose-fill is spun glass and doesn’t absorb moisture the way cellulose can, so it’s the better call in attics with any history of roof leaks or swamp-cooler condensate. You need it when you want a higher R-value per inch or when the existing insulation is fiberglass and you’re matching material. We blow Owens Corning and Johns Manville fiberglass, and because we air seal first, the fiberglass does the job it’s designed for instead of filtering hot attic air through the ceiling.
Dense-Pack Wall Insulation
Dense-pack is blown-in insulation packed tight into wall cavities through small holes drilled between studs, usually from the exterior or through interior drywall, then patched. You need it when your Las Vegas home was built with hollow walls – common in mid-century stock in Winchester and the older pockets of North Las Vegas – or when a wall faces west and the room behind it never cools down. We drill, pack to a measured density, and patch; on stucco exteriors we set the plugs flush and match texture so the repair doesn’t read from the street. Dense-pack is also the standard fix for cantilevered floors over garages, which is where a lot of Las Vegas two-story homes lose heat in winter.
Blown-In Top-Up
A top-up adds loose insulation over existing material to bring the attic up to a current R-value target, and it’s the most common job we run in Summerlin and Spring Valley homes built between 2015 and 2025. You need it when the builder installed the code minimum – often R-30 in this climate zone – and the attic has since settled or been disturbed by HVAC or solar installers. We measure existing depth and type first, then blow over the top only after we’ve sealed the leaks we find, so the new insulation isn’t just covering a hole. We’ll tell you if a top-up won’t help and a full removal and replacement makes more sense.
Brands We Service for Blown-In Insulation
We blow Owens Corning fiberglass and know how it behaves in a Southern Nevada attic: it holds loft well, but if the attic floor wasn’t sealed it will pull hot air through the ceiling plane and never show it in the thermostat. We also work with Johns Manville fiberglass, which we favor in attics with uneven truss spacing because its coverage charts hold up when the depth varies bay to bay. Knauf loose-fill is another material we run, and it’s a good fit where a homeowner wants a specific R-value on a tighter budget without dropping down to a lower grade.
On the cellulose side we blow GreenFiber and know how much it settles in the first year in this climate – which is why we blow to a slightly higher marked depth than the settled target and note it on your paperwork. Whether you have Owens Corning, Johns Manville, Knauf, or any other make already in the attic, we can help. We read what’s up there before we quote, and we tell you if a top-up over your existing material is the right move or a waste of money.
Signs You Need Blown-In Insulation Right Now

- Your upstairs rooms run 8 to 12 degrees hotter than downstairs in July. That gap is usually the ceiling plane leaking, not the AC failing. If the attic floor is thin or unsealed, the second floor becomes a heat collector every afternoon from June through September.
- You can see bare joists or thin pink when you look into the attic. Builder-grade coverage in Las Vegas homes is often R-30 or less, and after a solar install or a duct replacement, the material gets shoved aside and never restored. Bare spots act like open windows in the ceiling.
- Your energy bill climbed without a rate change. Insulation settles and compresses over time, and compressed fiberglass loses R-value fast. A bill that creeps up 15 to 20 percent over two summers usually points at the envelope, not the equipment.
- You feel drafts near exterior walls in January. Las Vegas winters are mild, but a hollow or under-insulated wall reads cold to the touch and pulls heat out of the room. Dense-pack wall insulation is often the fix.
- You’ve had rodents or a roof leak in the attic. Contaminated or wet insulation has to come out before anything new goes in, and blown-over pest damage just hides the problem. We inspect and tell you plainly what needs removal.
Our Blown-In Insulation Process – Step by Step
- 1
Attic inspection and written scope. We measure existing depth and type, photograph what we find, and check the attic floor for the leaks that matter – top plates, can lights, wire and plumbing penetrations. You get a written price and written scope before anyone lifts a tool.
- 2
Air sealing first. We seal the attic floor with foam and caulk before any insulation goes down, because blowing over an unsealed floor traps the leak under new material where you can’t fix it. This step is a requirement on our jobs, not an add-on.
- 3
Blower-door test. We run a blower-door test before and after the work – a pressurization measurement that shows in CFM50 how much air your envelope is losing – and publish the numbers on applicable jobs. This is how you verify the sealing actually worked.
- 4
Insulation install to measured depth. We blow to a marked depth that hits your target R-value, using depth markers stapled to the joists, and baffle the soffit vents so the attic can still breathe. Attic ventilation and insulation are two different jobs, and both have to be right.
- 5
Documented Photo Record and warranty. Before we leave, you get photos of the sealed floor, the finished depth, and the blower-door readings, plus the written warranty. Under our 365-Day Done Right Promise, if it’s not done right, we make it right.
How Much Does Blown-In Insulation Cost in Las Vegas?

A blown-in top-up in a typical 1,500-square-foot Las Vegas home runs $1,400 to $2,400, depending on target R-value and how much air sealing is needed first. A full attic job with old material removal and replacement runs $2,600 to $4,200. Dense-pack wall insulation is priced by wall square footage, usually $2.50 to $4.50 per square foot for the drill, pack, and patch, and a whole-house wall job on a 2,000-square-foot home lands around $6,000 to $9,000. These are real numbers for the Las Vegas market, not national averages.
What moves the price: attic square footage, the R-value target you’re hitting, whether old or contaminated material has to come out, how many air-sealing penetrations we find, and whether the attic is easy to access or a low-clearance hip roof. You avoid overpaying by getting a written scope that names the R-value, the depth, and the sealing work – then comparing quotes line by line instead of by total. Our free estimate includes the attic inspection, the written price, and the photos we took; if you already have a competing quote, bring it and we’ll read it with you on a free second opinion.
Blown-In Insulation Near Las Vegas – Our Service Area
We work across the Las Vegas valley, including Blown-In Insulation in Summerlin, Spring Valley, Winchester, North Las Vegas, Paradise, Sunrise Manor, Whitney, Enterprise, Henderson, Boulder City, and out toward Sandy Valley. Most Las Vegas addresses get a same-day or next-day inspection, and outlying areas like Boulder City and Sandy Valley usually schedule within a few days. If you’re comparing options across the valley, our Blown-In Insulation in Spring Valley page covers the older housing stock there.
Serving Las Vegas, NV – Our Local Coverage Area

We serve Las Vegas and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Blown-In Insulation in Las Vegas
Blown-in insulation is loose cellulose or fiberglass pumped by machine into attic bays or wall cavities to a measured depth that hits a target R-value. It fills gaps and odd shapes that batts miss, which is why it’s the standard choice for retrofitting existing Las Vegas homes. The key detail most homeowners miss: it only performs if the attic floor was air sealed first. Call (833) 362-4859 for a free estimate.
Most attic top-ups take 4 to 6 hours, and full removal-and-replacement jobs run a full day or a day and a half. Dense-pack wall insulation depends on wall square footage – a single exterior wall is a few hours, a whole house is two to three days. We give you the schedule in writing before we start, and our technicians call with a text when they’re on the way.
Most Las Vegas attic jobs run $1,400 to $4,200 depending on square footage, target R-value, and whether old material has to come out. Dense-pack wall insulation runs $2.50 to $4.50 per square foot. You get a written price before any work starts, and if you have a competing quote, we’ll review it with you at no charge. Call (833) 362-4859 for an exact quote.
Yes. We blow Owens Corning and Johns Manville fiberglass, along with Knauf and GreenFiber cellulose, and we read the existing material in your attic before quoting. Whether your attic has one of those brands or another make, we can help. We don’t lock you into a single product line, and we’ll tell you if a top-up over what’s there is the right call.
Same-day inspections are often available in Las Vegas, and a live person answers the phone 24/7 – no voicemail loops. True emergencies in insulation are usually storm or roof-leak related, and we can assess and stabilize the attic quickly. Call (833) 362-4859 and we’ll tell you honestly what can be done today.
Every completed job carries our 365-Day Done Right Promise: if it’s not done right, we make it right. You get a written warranty and written scope before anyone starts, plus a Documented Photo Record of the sealed floor and finished depth when we leave. That paperwork is yours to keep, and it’s what makes the warranty enforceable.
Clear access to the attic hatch, move vehicles out of the driveway, and take down anything fragile near the hatch. We tarp and protect the floor below the access point and clean up before we leave. You don’t need to empty the attic – we work around stored items, and our technicians will tell you if anything has to move.
Schedule Your Blown-In Insulation Service in Las Vegas Today

Whether your attic needs a top-up or a full replacement, you should know the price and the plan before anyone touches your home. Call (833) 362-4859 for a free estimate on blown-in insulation in Las Vegas, and we’ll inspect the attic, seal it first, and hand you the blower-door numbers when it’s done. A live person answers 24/7. Read more about the full service at our Blown-In Insulation in Las Vegas page, then call – the price is written before any work starts.
Written by the team at Envelope Insulation Co.