Fast, Reliable Radiant Barrier Installation Across Henderson
If your Henderson attic is cooking the rooms below it, a radiant barrier installed correctly can drop attic temperatures by 20 to 30°F. We install attic radiant barrier, foil, roof deck barrier and ventilation work across Henderson, and we treat air sealing as a hard prerequisite rather than an add-on. That matters here: Henderson sits in a wind funnel between the McCullough Range and the Las Vegas Valley, and the dust that funnels through ridge and soffit vents changes how this job has to start. Call (833) 362-4859 and a live person answers.
Why Envelope Insulation Las Vegas Is Henderson’s Preferred Radiant Barrier Installation Company
We’ve completed radiant barrier and attic work in Green Valley, Seven Hills, Anthem and the older single-story blocks near Water Street, and that spread matters. The 1990s-2000s tract homes in the master-planned communities were built to older Title 24 minimums, and the settled blown insulation we find in Sun City and Anthem Country Club attics tells you how those homes have aged under 100°F+ summers.
Our technicians have up to 10 years of experience, and every applicable job comes with before-and-after blower-door numbers – a pressurization reading that shows, in one figure, how much conditioned air the envelope was losing before and after. You get a Written Price Before Any Work Starts, a Documented Photo Record on every visit, and the 365-Day Done Right Promise. Bring us a competing estimate and we’ll read it with you under our Free Second Opinion. Calls are answered by a live person 24/7, and our Henderson customers are largely homeowners who read the three-star reviews as carefully as the five-star ones. We write for that reader.
Our Radiant Barrier Installation Services in Henderson

Attic Radiant Barrier
This is the workhorse install for Henderson’s single-story ranches and two-story tracts alike. Foil is fastened to the underside of the rafters, facing down into the attic, so it reflects radiant heat before it reaches the insulation and the ceiling plane. On Green Valley homes with low-slope hip roofs and short attics, the staple pattern and foil tension matter more than the foil itself – a sagging sheet reflects nothing.
Radiant Barrier Foil
Foil is a low-emissivity surface, which means it works by refusing to radiate heat rather than by slowing conduction. The catch in Henderson is dust. Fine desert sand driven through ridge and soffit vents coats the foil and cuts its emissivity over a few seasons. We rinse and dry the deck, verify the vent path, then tension or replace the foil flat against the rafters.
Radiant Barrier Roof Deck
On roof deck installs, the foil goes directly against the sheathing on the attic side, which is a common approach on the older downtown Henderson core ranches near Water Street where rafter spacing is irregular. We measure rafter bays first, because a foil run that bridges a gap will tear at the first temperature swing.
Radiant Barrier & Ventilation
Foil without working ventilation simply moves the heat problem. Ridge and soffit vents clogged with silt turn an attic into a trap, and we’ve measured attics climbing toward 160°F because of it. We clear the vent path, confirm intake and exhaust are both open, then install the barrier so the attic can actually shed heat. That combination is the one our Radiant Barrier Installation team recommends most often in Henderson.
Trusted Brands We Service in Henderson
Our materials come from Owens Corning, Johns Manville, Knauf, Rockwool, CertainTeed, Icynene, Demilec and GreenFiber, so there’s no product lock-in and no proprietary foil you can’t source again later. We don’t stock parts locally or run product out of a warehouse – the professionals who do the work in Henderson carry what the job needs, and we schedule for a one-trip install wherever possible. If your attic already has Knauf or Rockwool batts under silted foil, we work around them rather than defaulting to a tear-out. Call (833) 362-4859 for a written price before any work starts.
Common Radiant Barrier Installation Problems We See in Henderson Homes

- Foil silted and abraded by wind-blown sand. Near Anthem and Lake Las Vegas, dust funnels through ridge and soffit vents and dulls the reflective surface. The barrier is still hanging, but it’s no longer reflecting.
- Foil sagging or tearing after temperature swings. Attics that hit 150°F+ in July and drop to 30-35°F on winter nights open reflective gaps fast. Tension at install is the whole game.
- Vent channels clogged with dust. A radiant barrier laid over blocked vents traps heat instead of lowering it, and attic temperatures push toward 160°F while the homeowner assumes the foil failed.
- Foil installed over an unsealed attic floor. Top plates, can lights and penetrations leaking conditioned air defeat a radiant barrier. We seal first, then insulate, in that order – every time.
Pricing for Radiant Barrier Installation in Henderson, NV
A typical attic radiant barrier install in Henderson runs $1,200 to $2,800 for a standard single-family home, and foil-over-existing-insulation runs $900 to $1,800. Roof deck barrier on a larger Anthem home with complex roof lines lands between $1,800 and $3,400, and a combined radiant barrier plus ventilation package runs $2,000 to $3,800. Silt cleaning and vent channel clearing add $300 to $700 in the dust-exposed edges of town. Detached workshops and oversized garages in Henderson’s acreage pockets are quoted separately, usually $600 to $1,400 depending on door load and roof size. Before you commit, it’s worth running the NV Energy rebate math against the quote, since Henderson’s rebates can change the payback materially. Every price is written before any work starts.
We Also Serve Cities Near Henderson

We also cover Henderson and the surrounding valley edges, including Boulder City, Whitney, Paradise and Enterprise. The dust exposure drops as you move toward the sheltered central valley, but the summer radiant heat and winter heat-pump load don’t. Same written price, same photo record, same blower-door numbers where they apply.
Serving Henderson, NV – Our Local Coverage Area
We serve Henderson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Radiant Barrier Installation in Henderson

Henderson sits at the mouth of a wind funnel between the McCullough Range and the Las Vegas Valley, and fine sand gets driven through ridge and soffit vents for years. The foil’s low-emissivity surface gets coated and abraded, which cuts its performance. In the acreage and open-desert-edge properties around Anthem and Lake Las Vegas, attic foil is often found dust-silted and sagging after years of that wind-driven sand. A qualified local installer typically vacuums or blows the silt off the deck, reopens the air channels clogged at the soffits, then re-tensions or replaces the foil flat against the rafters. On detached workshops and oversized garages with heavy doors, the same crew usually confirms the door hardware and openers are rated for the added load and seals the vent path in one trip, because a second service drive to the edge of town is costly. Call (833) 362-4859 for an exact Henderson quote.
Yes, and Henderson has a specific reason it works both ways. Summer attic temps past 150°F push radiant heat into the living space and strain the cooling side, while winter nights at 30-35°F make reverse-cycle heat pumps work harder without proper R-value above the ceiling. Foil addresses the summer radiant load; the R-value and the air seal handle the winter side. Together they cut the run time on the same equipment. Call (833) 362-4859 and we’ll price both pieces in writing.
Yes, and it’s one of the more common Henderson jobs we quote. Acreage properties here often have detached shops and oversized garages with heavy doors, and the enclosure is usually the weakest one on the property. We quote the shop separately from the house and schedule it on the same trip so you aren’t paying two service drives. Estimates are free.
It changes the decision more often than the install itself does. NV Energy is a Henderson-based company, and its rebates are among the most aggressive in the country, so a Henderson insulation bid is genuinely a climate-performance-plus-rebate math problem in a way that doesn’t exist the same way across the valley. We’ll show you the before-and-after blower-door numbers and the scope, and you can run those against the rebate schedule before you sign. Call (833) 362-4859 for the written price first.
No. A radiant barrier over clogged vent channels traps heat and pushes attic temperatures toward 160°F instead of lowering them, which is the opposite of what you paid for. Ridge and soffit vents need the silt cleared and the intake-to-exhaust path verified before or alongside the foil install. That’s why we bundle radiant barrier and ventilation work in Henderson rather than selling the foil alone.
If you want a number written down before anyone lifts a tool, call (833) 362-4859 for a free estimate on radiant barrier installation in Henderson. You’ll get a flat written price, a written scope and warranty up front, and a Documented Photo Record when the crew leaves.
Written by the team at Envelope Insulation Co.