Reflectix Vapor Barrier Installation: The Las Vegas Owner’s Guide
We install Reflectix-compatible vapor barrier systems across the Las Vegas valley, and most crawl space and rim-joist jobs run between $1,400 and $3,800 installed depending on square footage and how much old material has to come out first. Same-day scheduling is often possible when you call before noon. Owners usually find the failure the same way: a musty smell rising through the floor, condensation on the foil face, or a barrier that has sagged off the joists entirely after a summer of attic-heat cycling.
Which Reflectix Models This Applies To
Reflectix sells its vapor barrier and radiant barrier products in several formats, and the one you have determines what goes back in. The common residential products are the double-bubble foil rolls (typically 16-inch and 24-inch widths, in 25-foot, 50-foot and 100-foot lengths), single-bubble rolls, and the perforated variants marked for applications where moisture needs to pass through. The perforation matters. Perforated and non-perforated rolls look nearly identical on the shelf, and putting non-perforated foil against a damp surface traps moisture rather than shedding it – a mistake we correct regularly in Las Vegas crawl spaces.
To identify what you have, check the printed edge of the roll for the product name, width and length, and measure the actual face width rather than assuming. For a replacement, the OEM Reflectix roll is the safe match when you want the same thickness and foil facing. A quality aftermarket equivalent with the same bubble count and facing works fine for crawl space and rim-joist installs, and often costs less per square foot. We’re an independent service provider, not affiliated with Reflectix, so we’ll tell you plainly when the aftermarket roll is the better buy.
Signs Your Reflectix Vapor Barrier Installation Is Failing

- Sagging between joists. Heat cycling in a Las Vegas attic or crawl space loosens fasteners over time, and once the foil loses tension it collects dust and stops reflecting. The cause is usually staples spaced too far apart for the span.
- Condensation on the foil face. Water beading on the barrier means warm moist air is reaching a cold surface. That points to an unsealed penetration above, not a bad roll of Reflectix.
- Tears at the seams and edges. Foil facing tears where it’s stretched over sharp framing or where the overlap was never taped. Rodents use those same openings.
- Musty odor in the room above. A smell that shows up in summer and fades in winter usually means ground moisture is getting past a barrier that has pulled loose at the soil line.
- Visible gaps at the rim joist. Gaps between the barrier and the sill plate let outside air straight into the floor assembly. In Las Vegas that’s a cooling-load problem as much as a moisture problem.
Replacement Cost & What’s Included
Installed pricing in Las Vegas depends on three things: square footage of the crawl space or rim area, how much old material has to come out, and whether the floor above needs air sealing first. Most single-family crawl space jobs land between $1,400 and $3,800. Rim-joist-only work on a smaller footprint often runs $600 to $1,400. Material is typically 20 to 30 percent of the total, with labor, removal and disposal making up the rest.
Every job starts with a written price before any work begins, and you get a Documented Photo Record of what we found and what we installed. The work is covered by our 365-Day Done Right Promise, and the written scope and warranty are in your hands before anyone lifts a tool.
DIY or Call Us?

You can safely check a few things yourself: measure the space, look for tears and sagging, and note where the barrier has pulled away from the rim joist. What we’d steer you away from is a full crawl space install in Las Vegas summer heat, and especially any work that puts you under a floor assembly with limited clearance and no second person watching. Sealing and re-hanging a barrier is straightforward when the space is clean and dry; it goes wrong when the real problem is air leakage above the barrier that nobody addressed. If you’re not sure which problem you have, call us at (833) 362-4859 and we’ll walk you through it.
FAQs
Ten to fifteen years is realistic in a protected crawl space; exposed rim-joist runs in full sun or attic heat often fail closer to seven to ten. The foil itself holds up; the fasteners and seams are what go first.
Sometimes. Small tears and a few loose sections can often be re-taped and re-secured for a fraction of replacement cost. Once more than about a third of the run has sagged or the material has lost its foil facing, replacement is the better value.
A typical crawl space takes one day; larger footprints or heavy removal runs into a second day. We’ll tell you the expected window in the written price before we start.
We source Reflectix and equivalent materials through standard building supply channels – no proprietary lock-in. You’ll see the product name and square footage listed in your written scope before work starts.
Get a Written Price for Your Las Vegas Vapor Barrier Job

If your Reflectix barrier has failed, we’ll come out, measure the space, and tell you what we found with photos to back it up. Call us at (833) 362-4859 for a free estimate, and we’ll have a written price in your hands before any work starts.
Written by the team at Envelope Insulation Las Vegas, serving Las Vegas and nearby areas.