Reflectix Insulation Removal & Replacement in Las Vegas: What to Know First
We provide independent Reflectix insulation removal and replacement in Las Vegas, typically completing a standard attic removal and replacement in one to two days. Most Las Vegas jobs run between $2,400 and $6,800 depending on square footage, how much old material has to come out, and whether a radiant barrier is being reinstalled. Every job starts with a written price before any work begins, so the figure you see is the figure you pay. We’re not affiliated with Reflectix – as an independent Reflectix service provider, we’re the crew that takes failing foil-faced material out and puts a working building envelope back in.
This page is for homeowners whose Reflectix is sagging, detaching, or sitting foil-down over fiberglass that has gone flat. It’s also for anyone who bought a house in the last ten years and found a foil layer in the attic they can’t identify. Call (833) 362-4859 and a live person answers, any hour.
How Reflectix Products Fail – and How We Fix Them
Reflectix is a foil-faced radiant barrier, sold at every big-box store in the valley, and it performs a specific job: it reflects radiant heat instead of slowing conductive heat. That’s a different job than insulation, and the failures we see in Las Vegas all trace back to that difference. Here are the five we find most often.
- Foil-down installation over bare fiberglass. The most common error is staple-down foil with the reflective face pointing up at the ceiling instead of down into the attic. Reflectix only reflects when the shiny side faces the air gap. Installed backwards, it traps moisture against the old insulation, which compacts the fiberglass. We pull the foil, remove the wet batts, seal the top plates, and reinstall with the face oriented correctly.
- Double Bubble foil with delaminated bubbles. Reflectix Double Bubble has two layers of bubble wrap between foil facings. In a Las Vegas attic that hits 150°F on a July afternoon, the adhesive holding those layers fails and the bubbles flatten into plastic film. Once they’re flat, the air gap that gives the product its R-value is gone. We replace it, usually with a proven radiant barrier or added blown insulation depending on what the attic actually needs.
- Condensation on the foil underside. Foil is a vapor barrier. Stapled tight to the roof deck in a vented attic, it traps moisture on the cold side and you get staining on the ceiling drywall or, worse, deck rot. We remove the trapped section, dry the deck, and correct the ventilation before anything new goes up.
- Duct wrap and HVAC jacket applied with Reflectix. Some installers wrap flex duct with Reflectix tape-down. Las Vegas heat cooks the tape, the wrap sags, and the duct loses its R-value. We strip the failed wrap, replace it with proper duct insulation, and pressure-test the seams.
- Foil-faced rigid board used as attic decking. Reflectix R-21 is sometimes laid flat as a walkway or storage surface. Foot traffic crushes the product and the R-value is gone. We remove it, address whatever’s underneath, and rebuild the surface with a product designed to be walked on.
What matters is that Reflectix isn’t a bad product – it’s a good product used for the wrong job in the wrong direction. Fixing it correctly means removing it and giving the attic what it actually needed in the first place.
Our Reflectix Insulation Removal & Replacement Process

- 1
Free attic inspection and written price. A technician walks the attic with you, photographs the foil installation, and identifies what failed and why. You get a flat price and a written scope before either of us touches a tool. Under Haven Standard Clause 1, that’s not a sales step – it’s the first deliverable.
- 2
Air sealing the attic floor first. We seal top plates, can lights, plumbing penetrations, and any gap we find, then verify with a blower-door test – a pressurization reading that shows in one number how much air your envelope is losing. We do not blow insulation or lay a new radiant barrier over an unsealed floor.
- 3
Removal. Failed Reflectix, saturated batts, and any contaminated material come out in sealed bags and are hauled off. Attic cleaning and rodent proofing happen here where needed, so you never inherit a problem you didn’t know about.
- 4
Replacement. Depending on what the attic needs, we install blown insulation (Owens Corning, Johns Manville, Knauf, or GreenFiber), a correctly oriented radiant barrier, or spray foam from Icynene or Demilec. No material lock-in – you get the one that fits the building, not the one we happen to stock.
- 5
Before-and-after blower-door readings. We run the test again once work is complete and hand you both numbers in writing. It’s the one figure that proves what you paid for.
- 6
Documented photo record and the 365-Day Done Right Promise. Photos of every stage, in your hands the day we leave. If anything isn’t right within a year, we make it right.
What Reflectix Insulation Removal & Replacement Costs in Las Vegas
Here are the ranges we see most often in Las Vegas attic work involving Reflectix removal:
| Job | Typical Range |
|---|---|
| Foil removal and replacement with correctly oriented radiant barrier (1,500 sq ft attic) | $1,800 – $3,400 |
| Foil removal + new blown insulation to R-38 or R-49 | $3,200 – $6,800 |
| Reflectix double-bubble removal + air sealing + blown insulation | $3,800 – $7,200 |
| Small foil wrap removal (garage, single room) | $600 – $1,400 |
| Attic cleaning and rodent proofing where found during removal | $400 – $1,200 |
What moves the price most: square footage, how many layers are stacked, whether a radiant barrier is going back in or we’re switching to blown insulation, and whether we find rodent contamination. Free second opinion on any competing written estimate – bring it to us and we’ll read it with you. Get the exact number in writing before we start: (833) 362-4859.
Why Las Vegas Homeowners Call Envelope Insulation Las Vegas for Reflectix Work

We’ve sealed and insulated 9,000+ homes since 2016, and every one of them got a written price before work started and a documented record when the crew left. That’s the whole standard – not a slogan.
Our technicians have up to 10 years of attic experience and know the difference between a Reflectix problem and an insulation problem. When we remove Reflectix, we replace it with whatever the attic needs; our material lineup includes Owens Corning, Johns Manville, Knauf, Rockwool, CertainTeed, Icynene, Demilec, and GreenFiber, so you’re never steered toward whatever product is easiest for us that week.
Background-checked, uniformed technicians. A live person answers your call 24/7. Documented photo record on every visit, not on request. Haven Standard promise in writing every time: arrive on schedule, named technician, text when they’re on the way. And the 365-Day Done Right Promise: if it’s not done right, we make it right.
FAQs
No – removal itself is a legitimate action and doesn’t void the product’s own manufacturer warranty; what voids it is installation in the wrong orientation or the wrong application. In most Las Vegas homes we see, the install already violated the manufacturer’s guidance. We document what we removed and why so you have a record if you ever need it.
Either is possible, but the choice depends on the attic. If your Reflectix was installed correctly and the problem is only aged adhesive or a small section of failed bubble, we can replace it in kind. If it was installed foil-down over bare fiberglass, what your attic needs is air sealing plus blown insulation – a radiant barrier can still go in, but only on top of a proper R-value. Our technicians will show you both options with a written price for each.
Most Reflectix removal jobs in Las Vegas are scheduled within a few days and completed in one to two days once we’re on site. Emergency situations – visible moisture, active rodent activity, or foil tape failing on HVAC ductwork – get priority scheduling. Call (833) 362-4859 and we’ll tell you the soonest availability for your zip code.
Yes – it’s the only way to know whether your attic air leaks were addressed during the removal. We run it before air sealing and after replacement, and both numbers go in your written record. Without before-and-after readings, you can’t verify the envelope actually improved.
Adding on top is cheaper but usually wrong. Foil-faced Reflectix staples down tight to the attic floor or roof deck; if you blow insulation over it, you trap the existing problem and the foil keeps acting as a vapor barrier in the wrong place. Reflectix removal is often the cheaper long-term path because the attic gets fixed once. Get a written price for both routes and you’ll see the difference.
Envelope Insulation Co. is an independent Reflectix service provider. Reflectix is a registered trademark of Reflectix, Inc.; we are not affiliated with or authorized by the manufacturer.
Lately we’ve also been removing failed foil products from other radiant barrier brands across Las Vegas, and the same principles apply – if a foil layer is in the wrong place doing the wrong job, the fix is the same. Call (833) 362-4859 for a free estimate on your Reflectix removal and replacement, and we’ll have a written price in your hands before anyone lifts a tool.
Written by the team at Envelope Insulation Las Vegas, serving Las Vegas and nearby areas.