A Topside company - serving Las Vegas, NV
R

Reflectix Blown-In Insulation in Las Vegas, NV

Reflectix Blown-In Insulation in Las Vegas: What to Know First

We install Reflectix-backed blown-in insulation in Las Vegas homes – most jobs are finished in a single day, and a written price is in your hands before any work starts. Most reflectix blown-in top-ups and full installs here run $1,900 to $4,800 depending on attic square footage, current R-value, and whether air sealing is needed first. If you own a home with Reflectix products and your attic is under-insulated or your radiant barrier is failing, this page walks through exactly what we find, what we fix, and what it costs in the Las Vegas climate. Call (833) 362-4859 and a live person answers, any hour.

Call (833) 362-4859

This page is for Las Vegas homeowners who already have Reflectix products in the building envelope and need blown-in insulation that works with them, not against them. We’re an independent Reflectix service provider – we’re not affiliated with or authorized by Reflectix.

Key Takeaways

  • Las Vegas summer attic temperatures regularly hit 150°F+; Reflectix radiant barrier products perform differently here than in milder climates.
  • We seal the attic floor before we blow a single bag of insulation – always.
  • Every job gets a written price before work starts and a Documented Photo Record when we leave.
  • On applicable jobs, you get before-and-after blower-door numbers so you can see the air loss you paid to fix.
  • Most Reflectix blown-in jobs in Las Vegas finish same day.

How Reflectix Products Fail – and How We Fix Them

Reflectix makes radiant barrier and reflective insulation products – foil-faced rolls, Double Reflective Foil Insulation (DRFI), and related attic-facing materials. When those products are paired with or replaced by blown-in insulation, the failure modes are specific and we see them repeatedly in Las Vegas attics.

  • Foil delamination on DRFI in high-heat attics. Reflectix Double Reflective Foil Insulation is a foil-bubble-foil sandwich. In Las Vegas attics that regularly exceed 150°F in July and August, the adhesive layer between foil and bubble can degrade faster than in cooler markets. You’ll see foil peeling at the seams or curling at the rafters. Our fix: we don’t try to re-glue failing foil. We assess whether the product still performs as a radiant barrier, and if it doesn’t, we remove the compromised sections, seal the deck below, and blow insulation to the correct R-value for Las Vegas (R-38 to R-49 is the standard target).
  • Reflectix stapled to rafters instead of laid on the attic floor – trapping heat instead of blocking it. This is the single most common misapplication we find in Las Vegas homes built or retrofitted between 2015 and 2025. Reflectix radiant barrier installed tight to the roof deck without an air gap on the hot side does almost nothing, and it can trap heat against the sheathing. Our fix: we correct the installation geometry, or we remove it and install blown-in insulation on the sealed attic floor where it belongs. Reflectix products are not a substitute for thermal insulation – they’re a radiant barrier, and the R-value still has to come from blown-in material.
  • Reflectix product buried under old, settled blown-in insulation. When a previous owner blew cellulose or fiberglass over an existing Reflectix radiant barrier without air sealing the attic floor first, you get two problems: the radiant barrier stops reflecting (it needs an air space to work), and the buried insulation hides air leaks at top plates and penetrations. Our fix: we remove the contaminated or compressed insulation where needed, air seal the attic floor – top plates, can lights, wire and plumbing penetrations – then blow fresh insulation to spec on top.
  • Reflectix radiant barrier combined with an under-insulated attic floor – the “one or the other” mistake. Some Las Vegas homeowners were told a Reflectix barrier alone would handle attic heat. It won’t. Radiant barriers reduce radiant heat gain; they don’t stop conductive heat loss through an R-11 attic floor. Our fix: we measure the existing R-value, show you the gap between what you have and what Las Vegas code and good practice call for, and blow insulation to close it. The Reflectix stays if it’s in good shape and correctly installed; the insulation goes in on the sealed floor beneath it.
  • Reflectix roll products used as a vapor barrier in the wrong orientation. Reflectix foil products are sometimes installed with the foil facing the wrong way or without a proper air gap, which in a Las Vegas attic can trap moisture against the deck in the shoulder seasons. Our fix: we inspect orientation and air-gap clearance, correct what’s wrong, and make sure any vapor strategy matches the climate – Las Vegas is a dry, hot climate, and the vapor approach here is different from what a Reflectix spec sheet written for a mixed climate assumes.

One detail you won’t find on Reflectix’s own site: in Las Vegas, the failure we see most on Reflectix DRFI isn’t the foil itself – it’s the tape and seam adhesive at the panel joints. Under repeated thermal cycling from 40°F winter nights to 150°F+ summer attic days, seam tape fails before the foil does. That’s a Las Vegas-specific reality, and it’s the first thing our technicians check on a Reflectix attic.

Our Reflectix Blown-In Insulation Process

Professional performing attic insulation installation with loose-fill blowing machine
Our Reflectix Blown-In Insulation Process

Every Reflectix job follows the same sequence, because the order matters more than the speed.

  1. 1
    Diagnostics and written scope. We inspect the attic, measure existing insulation depth and R-value, check the condition and installation geometry of the Reflectix products, and run a blower-door test – a pressurization reading that shows, in one number, how much air your envelope is losing. You get a written price and a written warranty before anyone lifts a tool. Haven Standard Clause 1: flat price, written scope, written warranty.
  2. 2
    Air sealing first. We seal top plates, can lights, and penetrations before any insulation goes in. We never blow insulation over an unsealed attic floor – that’s a hard rule, not an upsell.
  3. 3
    Material decision. For the blown-in portion, we source from Owens Corning, Johns Manville, Knauf, and GreenFiber. For Reflectix-related repairs, we use Reflectix-compatible materials where they exist and quality aftermarket foil products where the OEM part is discontinued or overpriced for the job. We’ll tell you which is which and why, and we won’t lock you into a proprietary product.
  4. 4
    The install. Blown-in cellulose or fiberglass goes in to the correct depth for your target R-value, evenly, with depth markers so you can verify it later.
  5. 5
    The test. On applicable jobs, we run the blower-door again and hand you both numbers – before and after – so you can see the reduction in air loss. No report, no invoice.
  6. 6
    Cleanup and Documented Photo Record. Every visit closes with photos of the sealed floor, the installed insulation, and the Reflectix condition. Included on every job, not available on request.

Our technicians have up to 10 years of experience, and they work on Reflectix jobs the same way they work on every other – sealed first, insulated second, documented throughout.

What Reflectix Blown-In Insulation Costs in Las Vegas

Real numbers, because “call for pricing” doesn’t respect your time.

Scenario Typical Price Range
Blown-in top-up (existing insulation, sealed floor, Reflectix barrier in good shape) $1,400 – $2,600
Full blown-in install (removal of old material where needed, air sealing, blown-in to R-38 – R-49) $2,800 – $4,800
Reflectix DRFI repair plus blown-in insulation $3,200 – $5,500
Dense-pack wall insulation with Reflectix wall products $2,200 – $4,200

What moves the price: attic square footage, how much existing insulation has to be removed, whether the Reflectix products are salvageable or need replacement, and how much air sealing the floor needs. Homes in older Las Vegas neighborhoods with more penetrations take longer to seal.

Every estimate is free and every price is written before work starts. Bring us a competing quote and we’ll read it with you – free second opinion, no pressure.

Why Las Vegas Homeowners Call Envelope Insulation Las Vegas for Reflectix Work

professional attic insulation service
Why Las Vegas Homeowners Call Envelope Insulation Las Vegas for Reflectix Work

We’ve sealed and insulated 9,000+ homes since 2016, every one with a written price before work started and a documented record when the crew left. The 365-Day Done Right Promise covers every completed job – if it’s not done right, we make it right. Calls are answered by a live person 24/7, no voicemail loops. Our technicians are background-checked, and you get a named technician and a text when they’re on the way. We work with Reflectix products daily alongside Owens Corning, Johns Manville, Knauf, Rockwool, CertainTeed, and GreenFiber, so we’re not tied to any one brand’s spec sheet. As an independent Reflectix service provider in Las Vegas, we tell you what we find and show you the numbers. Call (833) 362-4859 for a free estimate.

Get the price in writing before anything starts.A real person answers, day or night.
Call now

FAQs

Need Insulation help nationwide? Licensed & insured · 30-60 min response · free estimates
Call (833) 362-4859
Local Service Coverage

Request a Free Estimate in Las Vegas

Tell us what you need - Envelope Insulation Las Vegas responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch