Reflectix Wall Insulation in Las Vegas: What to Know First
Reflectix wall insulation work in Las Vegas is done by our independent crews, and most jobs wrap in one to three days. Reflectix is a reflective foil product, not a fiberglass batt or a spray foam, so the questions we get here aren’t about replacing a brand of insulation. They’re about where that foil layer sits inside a wall cavity, whether it belongs there at all, and what to do when a builder used it as a shortcut and the wall has been underperforming ever since. Our job is to measure what the wall is actually doing, then build the right insulation behind or in place of it.
This page is for you if you own a home with Reflectix foil somewhere in the wall assembly and you’re trying to figure out whether it’s the source of your comfort problems. It’s also for the homeowner who inherited it from a prior owner and just wants a straight answer about cost and outcome. We do this work as an independent Reflectix service provider. We are not affiliated with or authorized by Reflectix. Flat written pricing, no surprises. Call (833) 362-4859.
How Reflectix Products Fail – and How We Fix Them
Reflectix shows up in three places on Las Vegas homes we service: as a radiant barrier in the attic, as a foil layer stapled inside cavities during 1990s-to-2000s construction, and as a foil-faced reflective product behind stucco or drywall where someone added it as a “bonus” layer. All three fail in different ways. Here’s what we actually find.
- Foil stapled to a south-facing exterior wall with no cavity fill. Reflectix R-21 Attic Wall Foil and similar foil rolls were sometimes stapled directly to stud faces on the sun-side wall, and that’s it. On a Las Vegas south wall, that assembly can push the surface temp past 150°F in July afternoons, because a bare reflective layer with a sealed air gap only works when the gap stays intact. Once drywall screws or a stucco penetration breach the gap, the foil reflects into a non-air space and stops behaving like a radiant barrier. Our fix: cavity fill with injection foam or drill-and-fill fiberglass, air-sealed first, with the foil left in place only if the gap can be preserved.
- Reflectix Double Reflective Insulation used as a substitute for real cavity fill. A common aftermarket shortcut. The foil product is an air-gap radiant layer, not a conductive insulation. In a stud bay, it does not stop conductive heat through the lumber or stop air from moving past top and bottom plates. We frequently find this on east and west walls of 1990s-era Las Vegas homes in ZIP codes like 89118 and 89147. Fix: seal the wall’s air bypasses first, then install fiberglass or foam fill in the cavity.
- Foil-tape edges failing at the seams. Reflectix’s own foil-tape seams take thermal cycling hard in Las Vegas. From a 40°F January night to a 115°F July day, that tape walks. We see delaminated seams on attic-facing walls on a regular basis. Once seams open, the radiant layer loses continuity and the whole wall behaves like a very expensive sheet of nothing. Fix: retape with foil-rated tape rated to 200°F+ and re-check the air gap.
- Reflectix behind stucco, with moisture trap behind it. In a few flips and renovations we find Reflectix wrapped outside the sheathing and under a stucco scratch coat. The foil layer becomes a Class I vapor barrier on the wrong side of the assembly. In Las Vegas we have dry winters but monsoon weeks, and moisture that enters the wall from siding or stucco penetrations can’t dry inward. Fix: we don’t cap it, we investigate, and if the cavity is damp we dry it and rework the layering rather than papering over it.
- No blower-door number, no accountability. This is the biggest one, and it’s not a Reflectix failure. It’s a process failure. Homes we open up often have zero documentation of what the original foil install achieved. We get a before reading, do the work, and publish the after. If the wall assembly didn’t actually improve, you’ll see it in the number.
Our Reflectix Wall Insulation Process

- 1
Written price and written scope before anything starts. Haven Standard Clause 1: flat price, written scope, written warranty. We don’t start until you have all three.
- 2
Diagnostics. We do a blower-door test on the whole house plus a targeted wall inspection with a thermal camera and moisture meter. That tells us where the Reflectix is actually performing and where it isn’t.
- 3
Parts decision. OEM Reflectix foil and foil tape when a repair is the right answer. Injection foam from Icynene or Demilec, fiberglass from Owens Corning, Johns Manville, or Knauf, and mineral wool from Rockwool when the right answer is a full cavity fill. No proprietary product lock-in. We’ll tell you when the foil should stay and when it should come out.
- 4
Air seal first, insulate second. Top plates, bottom plates, penetrations, and any electrical or plumbing passes. We won’t blow a wall full of insulation over a wall that’s still leaking air.
- 5
Install, tape, verify. Cavity fill or repair, seams retaped with foil-rated tape, then a second blower-door reading.
- 6
Documented Photo Record and the 365-Day Done Right Promise. Photos of every wall we touched, every reading, every material spec, in your file when we leave.
What Reflectix Wall Insulation Costs in Las Vegas
Most Reflectix wall insulation jobs in a Las Vegas home run between $1,800 and $5,400 depending on wall count, cavity condition, and whether the foil stays in place. The refract is small compared to the comfort outcome, and a full envelope job meaning attic plus walls usually beats wall-only.
| Scenario | Typical range |
|---|---|
| Single exterior wall, foil reseal and cavity fill | $1,400 – $2,600 |
| Multiple exterior walls, drill-and-fill fiberglass | $2,800 – $4,800 |
| Injection foam retrofit behind existing Reflectix | $3,200 – $5,400 |
| Interior wall soundproofing (mineral wool, no foil) | $1,100 – $2,300 |
| Full envelope: walls plus attic air seal and insulation | $4,200 – $8,900 |
What moves the price: wall access (interior drywall vs exterior stucco), whether we remove the Reflectix or keep it, number of stories, and whether air sealing is straightforward or there are HVAC chases and can lights to work around. Bring us a competing written estimate and we’ll read it with you – that’s a free second opinion, no charge.
Why Las Vegas Homeowners Call Envelope Insulation Las Vegas for Reflectix Work

We’ve sealed and insulated more than 9,000 homes since 2016, every one with a written price before work started and a documented record when the crew left. Our technicians have up to 10 years of experience, and they know Reflectix well enough to tell you when it’s fine and when it’s the problem. Every applicable job gets a before-and-after blower-door reading, so you can see in one number what you actually paid for. The 365-Day Done Right Promise applies to all completed work: if it’s not done right, we make it right. Calls are answered by a live person 24/7, and a text confirms when the technician is on the way (Haven Standard: Arrive on schedule). On brands that aren’t Reflectix, we also work with Owens Corning, Johns Manville, Knauf, Rockwool, CertainTeed, Icynene, Demilec, and GreenFiber.
FAQs
Probably not in the affected area. Reflectix’s product warranty covers manufacturing defects in the foil or tape itself, but it typically doesn’t cover the labor or the surrounding wall assembly. Once a contractor has cut, sealed, or modified the foil, any warranty on that section may be scoped out. We don’t promise manufacturer warranty on Reflectix products. What we do promise is our 365-Day Done Right Promise on the work we perform, backed by a written scope and warranty you get before anyone starts.
Usually repaired, not replaced. The right call depends on whether the air gap is intact and whether the reflective layer is still continuous. If the foil is delaminated but the gap is fine, we retape and add cavity fill where it’s missing. If the foil is stuck to the stud face with no gap, or the wall is a moisture trap, removal and rework of the assembly is the better answer. We’ll tell you which on the estimate, with the diagnostic photos attached. Call (833) 362-4859 for a free estimate.
We source to spec: OEM Reflectix foil and foil-rated tape when a repair is the correct fix, quality aftermarket fill materials from Owens Corning, Johns Manville, Knauf, Rockwool, or Icynene/Demilec when a full cavity rebuild is the correct fix. We don’t stock Reflectix in a warehouse, and we won’t tell you we do. What we do is spec the right material for the wall, which sometimes means keeping the Reflectix and adding behind it.
Sometimes. Single-wall jobs on a one-story home often finish in a day. Multi-wall, injection foam, or full envelope work typically runs two to three days. The blower-door reading and Documented Photo Record happen on the last day, before the crew leaves.
Reflectix is a radiant barrier, not a conductive insulator. It works by reflecting heat back and needs an air gap to do its job. Fiberglass and foam insulate by slowing conductive heat through the cavity. On a Las Vegas wall facing west, you want both: the radiant layer keeps the sun-side heat load down, and the conductive fill handles everything the foil can’t address. That’s why our wall jobs almost never stop at “reseal the foil.”
Yes. Bring any written estimate and we’ll read it with you at no charge. That’s a Haven Standard offer, not a special. Call (833) 362-4859 or text us and we’ll set up a time.
If you’ve got Reflectix in the walls of your Las Vegas home and you’re not sure whether it’s doing anything, the answer is in the number, not in the sales pitch. Call (833) 362-4859 for a free estimate. You’ll get a flat written price and a written scope before any work starts, a documented before-and-after blower-door reading on every applicable job, and the 365-Day Done Right Promise backing the work. A live person answers the phone around the clock.
Written by the team at Envelope Insulation Las Vegas, serving Las Vegas and nearby areas.